Introduction
Edge protection profiles are installed on the front edge of metal sheets and plates. They protect surfaces from damage by sharp edges. Meanwhile, edge protection seal profiles feature a seal profile in order to provide additional sealing for doors, covers and hatches.
Uses and applications
With the use of edge protection when handling equipment and machine parts made of sheet metal profiles, the risk of cuts or abrasions is reduced to a minimum. In the process, in these applications the profiles provide a visual “decorative effect.” Other application possibilities include cable and tube laying, where openings and edges of divider plates need to be bypassed. This provides reliable protection from flaking or worn-down cables and tubes.
In general, using edge protection profiles can reduce the need for further treatment such as burring and chamfering of cut or laser-cut metal sheets. Edge protection seal profiles provide the same benefits as edge protection profiles.
However they are recommended for use in cases where doors, covers and hatches require additional sealing in order to prevent the emission of dust, warm air or noise; for example, or in order to prevent water spray from entering.
Specification
Clamping profile / Sealing profile Ethylene propylene diene rubber
- Clamping profile – hardness 65 ±5 Shore A EPDM
- Sealing profile – hardness 25 ±5 Shore A EPDM
- Clamp insert – steel wire polyester clamping band
- Temperature resistant -40 °C to 100 °C
Structure
Edge protection profiles consist of an extruded clamping profile which forms the base of the structure and is used on the edge of sheet metal in order to affix the edge protection profile.
In order to increase the clamping force, the clamping profile is strengthened through a reinforcement, preventing the pro-file from detaching itself after assembly.
The clamp insert is available as a steel clamping band or as a steel wire polyester clamping band. Steel clamping bands have a higher clamping effect, while steel wire clamping bands allow a smaller assembly radius, also enabling a more even alignment of the edges.
The seal profile is affixed to the top or the side of the clamping profile and is significantly “softer.” It can be made from the basic material of the clamping profile but it can also be made from particular materials for specific applications. In order to attain optimum sealing, the seal profile needs to be prestressed and/or formed to enable it to adapt precisely to the countersurface.
The sealing lips in the interior of the clamping profile ensure the sealing of the edge protection seal profile with the edge of the sheet.
Assembly
Side cutters and scissors that are suitable for cutting the metal clamping insert can be used to align the profiles. Any end parts of the clamp insert that protrude from the cutting area should be removed in order to prevent injuries. The profile ends and cants can be subsequently sealed and/or glued as required.
The mounting of the the profiles to the edges is secured via the clamp insert. Glue or other adhesives are required.
Profiles can generally be assembled by applying pressure by hand. If necessary, the profile can additionally be secured by lightly applying a soft-face hammer.
Certificate
Our quality management system is IATF 16949 accredited.
Manufacturer
Qinghe Bingyao Sealing Co., Ltd. is a professional manufacturer of edge protection profiles and edge protection seal profiles, heavy duty vinyl plastic U-channel push-on trim, PVC edge trim with metal core, vinly edge trim, flexible plastic edging trim, flexible PVC trim with steel clips and gripping tongues, vinly edge trim seal strip, flexible black PVC edge trim with individual internal clips, single gripping finger vinyl edge trim, dual gripping finger vinyl edge trim, plastic trim seal with steel core, edge protectors, edge protection profiles, pvc edge protections, quickedge trim, double lip edge trim, single lip edge trim, rubber edge trim with segmented steel carrier, push-on edge guard from Qinghe, Hebei, China.